Smartphone Cases/Single Carriers

The SC (Smartphone Case/Single Carrier) series of cases combines style with carrying convenience and exceptional protection for your valuable device.  The cases and linings are made entirely of hand-stitched leather.  All models are my original design.

You can request practically any color, case style or tooling design that you'd like.

I have been making cell phone/smartphone cases since even before the days of the early small flip phones.  Many can be seen by clicking on a model number in the list at the left, or by scrolling down the page.

See a model that you like, but don't see it in the size that you need?

No problem!

All Single Carrier model dimensions can be modified to fit any device.  For some, I even already have patterns to fit other sizes of cell phones that are not shown.  For inquiries about your particular device, contact me here.

Click category models next to pictures or in the column on the left for details.

SC508 – Originally made for an iPhone 7+ with an Otterbox.

Will fit any phone with the approximate dimensions of 6 1/2" x 3 3/8" x 1/2".

Carrying options can be either belt clip or belt loop.

Click the category model above or in the column to the left for details.

SC507 – Will fit any phone with the approximate dimensions of 6 1/8" x 3 1/4" x 1/2".

Carrying options can be either belt clip or belt loop.

Click the category model above or in the column to the left for details.

SC50★ – A little larger than the SC506 and a little smaller than the SC507. Can accommodate a device approximately 5 3/4" x 3" x 1/2".

Carrying options can be either belt clip or belt loop.

SC506 – Was designed originally for an earlier model of iPhone. I have used this model for my own Alcatel OneTouch Pop Icon which measures approximately 5 5/8” x 2 7/8” x 1/2”, but this case will accept a phone slightly (maybe 1/4”) wider.

After that, my thinner Samsung Galaxy 7 fit in it very loosely.

Carrying options can be either belt clip or belt loop.

Click the category model above or in the column to the left for details.

SC505 – Was designed originally for the Motorola Droid. Same style as its slightly bigger brothers. Will accept a device approximately 4 1/2” x 2 1/4” x 5/8”.

Carrying options can be either belt clip or belt loop.

Click the category model above or in the column to the left for details.

SC504 – Was designed originally for a Motorola 376g. Will accept a device approximately 4” x 1 3/4” x 5/8”.

Carrying options can be either belt clip or belt loop.

Click the category model above or in the column to the left for details.

SC503 – A mini-sized marvel. It used to be that people wanted phones that were really, really small! I don’t have records of what phone I originally designed this case for, but it will accept a device approximately 3 1/4” x 1 5/8” x 7/8”. Does anyone still use such a thing?  A small case with big quality, it has back and top flap lining and the top flap is shaped to permit a side antenna.

Carrying options can be either belt clip or belt loop.

Click the category model above or in the column to the left for details.

SC502 – Was designed originally for the Motorola Blade. It will accept a device approximately 3 15/16” x 2 3/16” x 7/16”. Carrying options can be either belt clip or belt loop.

SC501 – Will accept a device approximately 3 15/16” x 2 3/16” x 7/16”.  Made for a very small phone, the top flap keeps the device safe.  Expense is reduced because there is not a back/top-flap lining, hence, the Velcro© stitching is seen on the outside.  Carrying options can be either belt clip or belt loop.

Click the category model above or in the column to the left for details.

SC500 Concho – The Conchos are interchangeable and many styles are available. It will accept a device approximately 3 5/8” x 1 7/8” x 3/4”. Carrying options can be either belt clip or belt loop.

SC403 – The horizontal carry makes for a low-profile case. These cases are made with a belt loop carrying option only, as they are too short in height to install a belt clip. There is an opening on the bottom so that the device can be pushed out. This case was designed for the Motorola Blade and will accept a device approximately 3 15/16” x 2 3/16” x 7/16”.

SC202 – With its topless style, the SC200 series allows for a quick draw and easy replace of the device. Plus, with fewer parts to assemble, customers enjoy a useful product at a great price. Depending on the device to be carried, each model in the SC200 series is sufficiently deep enough to secure the device from accidentally falling out, especially if the fit is ever-so-slightly snug. Currently, of the SC200 series, all that I have on hand are few SC202 models. It will accept a device approximately 3 3/4” high or taller x 1 7/8” x 3/4”.